Heading RCADev

 

HOME

PHANTOM UAV

VACUUM FORMING

OpenTX

CONTACT ME

 

 

Previous Page - Hardware

Next Page Control Flow Diagram

OpenTX Reference Guide 27 Calibration

 

 

The calibration procedure sets the limits and centre points of each of the sticks, pots and sliders. This must be performed after initial purchase of the radio.

 

This table describes the calibration procedure.

 

Message

Procedure

[ENTER] TO START

Press ENT button

CENTER STICKS/SLIDERS

[ENTER] WHEN DONE

Move the sticks, sliders and pots to their centre positions, then press ENT.

MOVE STICKS/POTS

[ENTER] WHEN DONE

Move both sticks fully up, fully down, fully to the left, fully to the right.

Move all of the pots and sliders fully clockwise and then fully anticlockwise.

Press ENT

[ENTER] TO START

The procedure has been completed.

 

Phantom Divide

 

Previous Page - Hardware

Next Page Control Flow Diagram

 

Footer RCADev